供应JDB-T铸铁镶嵌润滑轴承/模具导套/导板

嘉兴固润生产的JDB-T铸铁镶嵌轴承/模具导套是以HT250为基材嵌入固体润滑剂的新产品，是一种典型的省材产品。能大大降低成本，满足用户要求。例：汽车模具，注塑机模架等。
基体材质: 优质高强度铸铁或钢铁
基体硬度:HB180-230
摩擦系数:<0.18
较高使用温度:400 ℃
极限动载荷:60N/mm2
lm/min的极限载荷:15N/mm2
较高滑动速度:0.5m/s
使用极限PV值 :0.8N/mm2 *m/s
JDB-T Cast-Iron Embedded Bushing
JDB-T is based on cast irom Ht250 and embedded with solid lubricant.Very good performance when under low load. Not suitable for middle and high load.
A typical cost saving material, can substitute JDB to be applied in the position without high requirements such as die guider, plastic injection machines etc.
Base material:HT-250
Base Hardness:HB180-230
Friction coef(u):<0.18
Temperature limit :400 ℃
Dynamic load limit:60N/mm2
lLoad limit under lm/min:15N/mm2
Speed limit:0.5m/s
PV limit:0.8N/mm2 *m/s